 |
Step
1: Remove the 4 rubber pads and the 2 stickers where the arrows
are pointing. |
 |
Step
2: Remove the 6 exposed to screws using a T15 Torx bit or screwdriver. |
 |
Step
3: Flip the console right side up and then carefully remove the
cover. |
 |
Step
4: Remove the IDE(grey ribbon) cable from the Hard Drive and DVD
Drive. |
 |
Step
5: This is a picture showing the ribbon cable removed from the
DVD Drive. |
 |
Step
6: Remove the yellow power cable from the DVD Drive. |
 |
Step
7: Remove the power cable from the Hard Drive. |
 |
Step
8: Use a T10 Torx bit or screw driver to remove the 3 screws.
For a close up of the screws please click the appropriate arrow. |
 |
Step
9: Remove the yellow power cable, the IDE(grey ribbon) cable and
the cooling fan connection. |
 |
Step
10: Remove the main power cable. |
 |
Step
11: Remove the front panel data cable (yellow cable for the Eject
and Power button). |
 |
Step
12: Carefully remove the Controller port daughter board. |
 |
Step
13: Using a T10 Torx bit or screw driver remove the 11 screws.
Once all 11 screws have been removed carefully remove the motherboard
from the case. |
 |
Step
14: This picture displays the case with only the power supply
and cooling fan. The motherboard has been removed. |
Xbox
Xbox 360
PS2
PSP
DS
GC
Pre-Modified
Install Service
